Categories: 1836 births1910 deathsLandscape artistsArt Students League of New York alumniArtists from BostonGilded AgePeople from Scarborough, MaineRealist paintersMarine artistsAmerican watercoloristsBurials at Mount Auburn Cemetery19th-century American paintersAmerican male painters20th-century American painters20th-century American printmakersAmerican landscape paintersPainters from FloridaHistory of Key West, Florida
I am getting quotes to paint the exterior of a 2,500 sq ft split levei home that just had all new windows and pre-primed Hardiplank installed 3 months ago. the quotes are up to $2,500 different ranging from power wash,prime again 3 coats of paint to no powerwash needed so soon and one coat of paint.. All quotes include trim. One includes complete replacement of 80 feet facia boards another just 40 feet.

After Homer's high school graduation, his father saw a newspaper advertisement and arranged for an apprenticeship. Homer's apprenticeship at the age of 19 to J. H. Bufford, a Boston commercial lithographer, was a formative but "treadmill experience".[6] He worked repetitively on sheet music covers and other commercial work for two years. By 1857, his freelance career was underway after he turned down an offer to join the staff of Harper's Weekly. "From the time I took my nose off that lithographic stone", Homer later stated, "I have had no master, and never shall have any."[7]


The perfect roller would hold a roomful of paint, leave the right amount of texture, wouldn't spray or fuzz, and would be easy to clean. Until somebody invents the ideal one, follow these tips to choose the right roller. "The longer the nap, the more paint the roller will hold, but it will also create more texture." says Dixon. "A 1/2-inch nap lamb's-wool roller holds plenty of paint without too much texture," says Dixon. "Less expensive rollers can work," says Span. "Just wash them first in dishwashing liquid to remove any stray fibers." Most of the pros we spoke with prefer 9-inch rollers over 18-inch models -- they are lighter, cheaper, and easier to use. Despite these shortcomings, Maceyunas swears by the wider roller. "The roller can do a whole wall in a few up and down strokes instead of in several dozen W and M strokes," he says.
Also prime the ends of adjoining boards. This step pays off by slowing the moisture penetration that can lead to peeling at the joints. If the new siding is redwood or cedar, buy a special “stainblocking” primer. Both of these woods contain natural chemicals (tannins) that can bleed through paint, causing brownish stains. A stain-blocking primer will seal in the tannins.

While black is usually associated with somberness and malignity, it can also represent sophistication, reverence and physical attraction. Interior designers have traditionally shunned black paint, but homeowners increasingly choose it for trim and accents that are meant to be dramatic and striking. Black is the perfect match and contrast for white, and the amount used can range from trim areas to an accent wall. With the right furniture and décor, black is ideal for living rooms, bedrooms and ultra-modern kitchens.
We have shot a numerous amount of videos with Andy answering all of your most frequently asked questions, and we want to give them to you for FREE. Every question and concern that our past and future clients have asked and would like to know have been answered, and can be found within these videos. All you have to do is CLICK HERE for instant access to the FREE videos!
When you refinish your existing cabinet doors, you get a whole new look without the astronomical costs normally associated with a kitchen remodel. It’s a much smarter way to update your space, especially if your cabinets are still in good condition. It doesn’t make sense to throw out perfectly good materials, just because you’re tired of the color.
A number of factors help determine when you should paint your home’s exterior. These include your local climate and weather conditions, the age of your home, and the type of siding used. A high-quality finish in ideal conditions could last 10 years. But if your home takes a beating from the elements, you may need to repaint as often as every three years. Most homes can be on a 5-8 year interval. If you’re not sure if your house is due for a refresher, watch out for signs of deteriorating paint, such as fading and chipping.

It's okay to receive ballpark figures over the phone however, insist upon an in-home estimate. A quality painter will help point out why certain parts of the project might be more expensive and can even talk through the repair process if it's necessary. A painter should also ask questions regarding access to the painting site, where they should park and if any HOA rules prohibit hours of work.
I am getting quotes to paint the exterior of a 2,500 sq ft split levei home that just had all new windows and pre-primed Hardiplank installed 3 months ago. the quotes are up to $2,500 different ranging from power wash,prime again 3 coats of paint to no powerwash needed so soon and one coat of paint.. All quotes include trim. One includes complete replacement of 80 feet facia boards another just 40 feet.
Most interior painting projects will present corners and edges. Corners, trims, splashes and accents will require cutting in — which generally requires the most patience, preparation and skill. There is a lot of debate among painters whether it is better to cut in before or after applying the roller. Solo painters may want to prepare the surfaces first, apply painter’s tape where required and cut in before applying paint to the rollers. Painters working in teams can split cutting in duties in sections while other team members are applying paint with rollers.
To begin, move everything out of the room. Every painter we spoke with had a horror story about the time he didn't follow Rule No. 1. Bigger pieces of furniture can sometimes be left covered in the center of larger rooms, but if you are repairing drywall, says Chris Span, of Span's Quality Painting in Mobile, Alabama, "Take everything out. Drywall dust goes everywhere." Remove doors, light fixtures and hardware, and label everything with masking tape. Also, invest in drop cloths. "It's surprising how well a few drops of paint can cover a floor," says Rich Maceyunas, of Maceyunas Painting and Wallpaper in Waterbury, Connecticut. Buy high-quality drop cloths, such as canvas or paper-backed plastic. (Paint soaks right through lightweight fabrics and bedsheets.) Plastic sheeting works, but it's very slippery and doesn't absorb drips.

Ask companies to include all details in writing. Although that sounds simple enough, too many contractors submit offers such as "paint house for $5,000." A friendly contractor may offer a reassuring handshake and promise that the crew will take care of all the details — starting on time, working every day, cleaning up, etc. That's great, but why not include each point in the proposal? If it's a challenge to get a written description of labor, materials and other details, things will probably get worse when the work starts.


If there is any peeling — and there usually is somewhere — it's essential to scrape off any loose paint. This doesn't just mean the parts that are already separated from the wood and ready to fall off on their own. Each spot where paint has peeled loose needs to be scraped thoroughly until you can no longer get the sharp corner of a putty knife under any of the surrounding edges of paint. Then, the bare spot needs to be sanded until the paint edges are smooth.
The floor and ceiling surfaces cannot be ignored, as they are crucial elements of color combination. Most ceilings are traditionally painted white for a number of reasons — particularly for their ability to keep rooms looking bright and to avoid taking attention away from the walls. Lighter ceiling colors can also help to make a room appear larger and more open.
Painters will need several supplies for your home exterior project in addition to paint. Consider personally providing any materials that can be obtained without a license to reduce project costs. Painting supplies are also handy to have around for maintenance and touch-up jobs after the job is complete. The cost to invest in painting supplies will probably run you no more than $200 to $300, unless you buy really high-quality products from specialized paint shops. Consider purchasing the following:
Historically, the painter was responsible for the mixing of the paint; keeping a ready supply of pigments, oils, thinners and driers. The painter would use his experience to determine a suitable mixture depending on the nature of the job. In modern times, the painter is primarily responsible for preparation of the surface to be painted, such as patching holes in drywall, using masking tape and other protection on surfaces not to be painted, applying the paint and then cleaning up.[2]
basic formula? single color exterior labor only ranges from $0.85 to $0.95 per sq foot as a BASE starting point. Prices go up depending on multiple colors, slope of surrounding areas, multiple stories..etc.Some painters charge per window to mask off. Ive seen $25 a window to $50.  Interiors without flooring can be factored the same way. When you start having to do multiple colors, cut ins, masking, room isolation...etc. the price jumps considerably. I always start with a base of $0.85 a sq foot and figure it out from there. the season plays a major role too. paint and materials are charged separatly and are typically marked up at a minimum of 15%. I always tell clients this. that way they pick the paint out they want and what quality they want as well. Anyways...thats your base. 1250 sq foot home @ .0.95 a ft = $1,187.50 (one color). Pressure washing, Add another $45-$55 per hour. a 1250 sq ft home is not going to take longer than 2-3 hours if its a single story. 
For interior jobs, make sure you've cleaned all of the awkward spots, including behind the toilet, and picked up any knickknacks that might get in the way (e.g., soap containers, loofahs, and kitchen organizers). Removing the switch plates and outlet covers from the walls also goes a long way toward speeding up painting time—and painters' time is (your) money.
For years, Handy has been living up to its name by connecting busy customers with house painters. It doesn’t matter whether you live in a house or an apartment—you’re just a mouse-click away from booking top-rated residential house painters. Using Handy to find house painting services is a great way to save time and money! All you need to do is type in your zip code, enter a little information about your wall painting job, and within minutes, you’ll be connected to a top house painting professional in your area. 
The psychological effect of green is largely dependent on the tone or hue. Some green hues create a positive, natural atmosphere. However, darker hues or pale olive green can seem militaristic or ill. Multiple shades of green can serve different purposes and set different moods. Maritime greens are ideal for studios and offices as they inspire concentration, while cool forest greens can be used in bedrooms and bathrooms.
The best time of the year to paint your home is typically in late spring and early summer when it’s warm outside and moisture is low. This can change based on your geographic location. For example, fall can be a good time to paint in California when the difference between high and low temperatures is low. Your painter will select the optimal time to start your exterior painting project.
Painters should have a proper business license; this gives them access to wholesale pricing and lines of credit at a paint supply store. It's also important that your painter is bonded and insured. Bonding means that a third party company has reviewed the professional and has granted him or her a certain amount of surety bonding. The bond helps protect the homeowner from financial damage if the contractor refuses to complete work or doesn't pay subcontractors. Insurance protects both the painter and the homeowner in the event of an accident, injury or damage to the property. Ask to see all of these pieces of information and verify the dollar amounts.
Ideally, you want as much paint on the brush as you can control without making drips or blobs. To do this, Doherty dips his brush about 1 1/2 inches into the paint, then taps (not wipes) each side of the brush against the side of the can. Tapping knocks off the drips and forces the paint into the bristles. "The brush releases the paint just like a fountain pen," he says. Weeks agrees, saying, "Just be sure to keep your brush moving, or it'll start to drip." For more delicate work, such as when you're painting trim or window sash, you'll want less paint on the brush. Doherty again dips and taps his brush, but this time he also scrapes the sides against his can. "The outside bristles are drier and easier to manage," he says, "but there's still plenty of paint on the brush."
Even if you think you'll probably do the job yourself, it's good preparation to seek estimates from professional home painters, whether your painting the exterior or interior of your home. Then you'll have a financial point of comparison and you may benefit from what a home painting contractor has to say about the condition of your home, color choices and types of paint available. Let the painter make his pitch for a professional job before you decide what to do. You can still opt to do it yourself while having learned something worthwhile.
"Cutting in is an acquired skill, but it's something you can't do at all with a ratty brush," says Doherty. When cutting in on a wall, he loads his brush and spreads out the excess paint, then works the brush up to the line between wall and ceiling. A brush stroke that's too wide creates a hatband, or smooth brushed band, on the very top of the wall where it meets the ceiling. To avoid this, Dixon recommends rolling first and then cutting in with a brush. "A good roller can get within 1/2 inch of the ceiling," he says. "You'll save time by not brushing more then you have to." When painting baseboards, "a wide taping knife makes a good paint guard," says Span. "Just keep the blade clean to prevent drips from working around the edge of the knife."
To get at the nails in the board above, shove a flat pry bar up under it and gently pry the board outward. In most cases, this will pop up the nailhead, so you can pull it with your hammer claw. If you run into a stubborn nail that won’t move easily, don’t use brute force and risk splitting the good board. Instead, slip a hacksaw blade behind the siding and cut the nail (Photo 2).You can’t get the new board in unless you pull the remaining shank of the cut nail (Photo 3).
There are cases where apartment complexes allow you to choose from a color wheel of neutral hues before you move in. Some charge a fee for calling in a painter to do the walls, while others offer new paint as a benefit of moving in. If you're not a fan of neutral colors, consider looking for an apartment that allows you to paint the walls a more expressive tone. Otherwise you can invest in boldly colored furniture and posters.
Freshly painted walls often look blotchy. The color is uniform, but the sheen isn’t consistent. This usually occurs over the holes and cracks you patched with a filler or drywall compound. The porous fillers absorb the paint, dulling the surface (a problem called “flashing”). When light hits these dull spots, they stick out like a sore thumb. The smooth patch also stands out in contrast to the slightly bumpy texture of the rest of the wall. A quick coat of primer is all it takes to eliminate flashing and texture differences.
O'Neil patches shallow holes and divots with Ready Patch because it dries fast, sands smooth, and stays flexible. Deep cracks and rotten spots are best repaired with two-step epoxies, such as those made by Advanced Repair Technology. (For a step-by-step instructions, see Repairing Rot with Epoxy.) The days of using polyester auto-body fillers on wood are over. "They cure too hard," says Portland, Oregon–based painting contractor Kathleen George. "They look good at first, but then they peel away."
Sanding not only feathers out chipped paint but also provides "tooth" for the next coat of paint. For glossy trim, use a sanding sponge rather than sandpaper. Sponges mold to the shape of the trim and last longer than paper. When applying latex over alkyd paint or when he is not sure of the original finish, Brian Doherty, a painter in Richmond, Virginia, follows the hand-sanding with liquid sandpaper to make sure the surface is completely deglossed to prevent incompatibility problems. "I've seen homes where latex was used on oil-painted trim, and the paint started to peel in less than a year," says Doherty.
Hi Donnie, Thanks for your comment! We would be happy to help you connect with a fencing pro to give you an estimate on your project. You can submit a request to our pros here: www.homeadvisor.com, browse a list of local pros here: http://www.homeadvisor.com/c.html, or send your info to [email protected] and a project advisor will reach out to assist you. –HASupport
Painting professionals might charge more or less to paint your home's exterior based on its construction material. Some materials cost more to paint than others because of their texture, the paint required to properly cover them, and whether specialized materials are required to prepare them for painting or the elements. Find more information on the various types of siding available, as well as how much it might cost to paint or prepare each.
The cost to paint metal siding -- most commonly aluminum and galvanized steel -- will depend on a variety of factors. In some instances, a simple cleaning will suffice to prepare metal siding for painting. In worst cases, painting professionals will need to repair metal that is rusted, damaged or missing pieces due to climate conditions. In the case of severe damage, a professional will have to remove the old finish and paint to get to the original layer, which will add on to the final price. When you add the actual painting of the metal siding, you might be looking at a final bill between $400 (~250 sq. ft.) and $1,500 (~1,000 sq. ft.).
When coverage is difficult to estimate, add more rather than less. You can always pour the leftover back into cans. For large jobs, use the bucket and a roller screen rather than a roller tray. It’s much faster to load your roller with the screen than to use a roller pan. Simply dunk the roller into the paint bucket, then roll it along the screen until it stops dripping.
×